Open the APP to enter the device homepage, click the menu bar in the upper right corner, and choose to enter the firmware upgrade; before firmware upgrade, please make sure the robot is in the charging base and keep the power on, and the power required for firmware upgrade should be ≥15%.
When the robot and the mobile APP are not connected to the same WiFi , click to enter the remote control APP and prompt "Before entering the remote control, please keep the mobile phone and the device under the same WiFi "; for safety reasons, the robot and the mobile APP need to be connected to the same WiFi Only...
Open the APP and enter the device home page, click the upper right corner menu bar to set the Y word cleaning (factory default bow word cleaning ); Y-shape cleaning: Start cleaning with a Y-shape, and the path is a Y-shape, which can clean more efficiently. Under the same conditions, the time required is about 1.2 times that of the...
If you want to perform the factory reset function, click "Restore Factory Settings" and "OK" on the APP side. At this time, the device will be reset and restarted, and the device has been restored to the factory state. Note that it cannot be restored after a factory reset. In addition, long pressing the robot power button + recharge button...
