Skip to content

Smartmi VortexWave A1

Robot voice broadcast radar abnormality

The robot itself has a radar protection function. When the radar is damaged or blocked, the robot will alarm and stop working, and the danger needs to be removed manually. Note: When the voice broadcast of radar-related abnormalities, please check whether the radar mask is stuck by foreign objects, whether the radar is blocked, and move to a new position...

The robot voice broadcasts that the cliff sensor is abnormal

The robot is equipped with a cliff detection sensor, which can prevent the robot from being injured and damaged by falling from stairs and steps higher than 8cm when cleaning. When the cliff sensor fails or is obscured by dirt, the robot will alarm and stop working.

Why does the robot sometimes scan twice? What is automatic focus cleaning?

When the robot cleans the entire image, the single cleaning area is less than 4 square meters (the actual cleaning area of the robot), or the cleaning time is less than 10 minutes, the area will be automatically recognized as a key cleaning area, and the “well” cleaning will be performed, that is, two The 90-degree bows are clean .

What kinds of air-drying modes are there? What's the difference?

The robot has two kinds of air-drying functions, namely, the robot air-drying and the charging base air-drying. Robot air-drying function: After the roller brush self-cleaning in the scrubbing mode , the robot automatically performs the roller brush air-drying task for 8 hours (using the internal waterproof fan), and the air-drying stops when the time is up. Note: After the roller...